Medical Portable Piston Compressor Nebulizer
Short Description:
Compressor motor model
Compact design, for heavy-duty use in hospital, clinics, office, home and gym etc.
Powerful, dependable ball bearing piston pump-work life 3000 hours
Continuous treatment more than 8 hours
Safe and effective
High quality and best service
Product Introduction
Medical Portable Piston Compressor Nebulizer is designed to efficiently deliver the prescribed saline solution to treat your respiratory disorders, such as asthma, allergies, and bronchitis. The device will convert the saline solution into an aerosol mist that penetrates through your lungs.
This Medical Portable Piston Compressor Nebulizer is widely used in home and clinic for treating the upper and lower respiratory tract.This device is suitable for inhalation at home and other places. Medicines should only be inhaled when instructed by doctors.It is designed for respiratory treatment tract infection prevention.
This item is Compliance with Electrical Safety ClassII Type BF Class IIa,also
MDD 93/42/EEC，CE 0197 Measured in accordance with BS EN 13544-1,EN 60601-1 and EN 60601-1-2.safe and easy to operate.
Parameter
1.Description: Medical Portable Piston Compressor Nebulizer
2.Model NO.: CN-02
3.Type: Compressor type
4.Motor pump:oil-free ball-bearing piston motor
5.Weight:1.6kgs
6.Power supply:AC220V+10%;50Hz
7.Power consumption: 65W
8.Motor Work life:>3,000hours
9.Compressor Pressure:: 2.5-3.5Bar
10.Compressor Free Air flow:>12LPM
11.Particle Size: <3.0µm(75%)
12.Average nebulizing rate: 0.30ml/min
13. Medication:: 2-10ml
14.Sound level: <55dB(A)
15.Operation Temperature Range:10°C~to40°C(50°F~104°F)
16.Operation Humidity Range:10%~95%RH
17.Storage Temperature Range:-20°C-70°C(-4Fto158F)
18.Storage Humidity Range:10%~95%RH
How to operate
1. Before using the device, Make sure the accessories are cleaned and disinfected.
2.Open the Medication Chamber by turning the top in an anti-clockwise direction.
3.Put the quantity of medication into the nebulizer chamber as prescribed or suggested by your doctor.
4.Close the Medication Chamber by turning the two parts clockwise, paying attention that they are thoroughly sealed.
5.Connect one end of the air tube to the chamber and the other end to the air outlet.
6.Connect the mouthpiece or face mask onto the nebulizer.
7.Plug the device into the wall socket, making sure the electrical rating shown on the
rating plate on the bottom of the unit corresponds to your main voltage.
8.To start the treatment, switch the device on by pressing the ON/OFF switch onto the “I” position.
9.Inhale the aerosol solution using the prescribed accessory.
10.When the treatment has been completed, switch the unit off by setting the switch
position “O” and disconnect the plug from the wall socket.
For the detailed operation procedure,please read the related user manual carefully and follow it.Make sure that you can operate it and correctly and safely.