Automatic Digital Electronic Blood Pressure Sphygmomanometer
Short Description:
Automatic digital electronic blood pressure sphygmomanometer
Upper arm style
Large LED touch screen
Intelligent voice broadcast
Automatic measurement and automatic shutdown
Product Introduction
The blood pressure monitor uses the oscillometric of blood pressure measurement.this means the monitor detects your blood movement through your brachial artery and converts the movements into a digital reading. An oscillometric monitor does not need a stethoscope so the monitor is easy and simple to use.
The blood pressure monitor is intended for use in measuring blood pressure and pulse rate in adult patient population. The device detects the apprarance of irregular heartbeats during measurement and gives a warning signal with readings.It can be used in hospitals,clinics and families.
Automatic digital electronic blood pressure sphygmomanometer LX-01 is a big LED screen model,we have ordinary/voice style.the voice style is popular for those old people who are poor eyesight. color). It can automatic shutdown in 1 minute if no operation.It offers fast, safe and accurate blood pressure & pulse rate result.The last 60 groups measured reading is automatically stored in memory, allowing users to easily track their blood pressure levels.
Parameter
1.Description: Automatic digital electronic sphygmomanometer
2.Model NO.: LX-01
3.Type: Upper arm style
4.Measurement principle:Oscillometric method
5.Measurement range: SYS 60-255mmHg，DIA 30-195mmHg; Pulse 50-240pulses/min;
6..Accuracy: Pressure ±3mmHg (±0.4kPa); Pulse ±5% of reading;
7.Display: LED digital display
8.Memory capacity: 60 sets memory of measurement values
9.Resolution: 0.1kPa (1mmHg)
10.Power source: 4pcs*AA alkaline battery or Micro-USB
11.Applied part:Type BF
12.Use Environment: Temperature 5℃-40℃,Relative humidity 15%-85%RH,Air pressure 86kPa-106kPa
13.Storage condition: Temperature -20℃--55℃;Relative humidity 10%-85%RH,Avoid crash,sun burn or rain during transportation
How to operate
1.Keep relax before measuring,sit down quietly for a moment.
2.Palms up,put the arm band parallel to the heart.Palms up,keep the intake pipe and the arteries paralleled.
3.Wrap the arm band around your arm tightly in the opposite direction,paste together,if can place one finger into it,then it is the most appropiate.
4.Keep the arm band paralleled to the heart,palms up.
5.Press the ON/OFF button,keep relaxed and start measuring.then the results will display after 40 seconds.
For the detailed operation procedure,please read the related user manual carefully and follow it.
